WELCOME TO OUR SITE
WELCOME TO OUR SITE
WELCOME TO OUR SITE

Meeting the needs of the industry

Services

SINGLE-ACTING HOLLOW PISTON STEEL CYLINDERS

For safe pulling, pressing and tensioning of heavy loads

DOUBLE-ACTING HOLLOW PISTON CYLINDERS

Light alloy allrounder for lifting, pulling or tensioning.

AIR-HYDRAULIC PUMPS
for single-acting and double-acting cylinders

FLAT CYLINDERS

The perfect helper when things get tight.

PERISTALIC PUMPS
we have variety of PERISTALIC PUMPS which suits all your need and desire

 

DIAPHRAGM METERING PUMP
we have variety of DIAPHRAGM METERING PUMP which suits all your need and desire

HYDRAULIC EQUIPMENT
we have variety of HYDRAULIC EQUIPMENT which suits all your need and desire

ALL TYPES OF SOLAR GEYSERS AND PANELS
we have variety of SOLAR GEYSERS AND PANELS which suits all your need and desire

MINEPRO 500HPV POWER PACKS
we have variety of POWER PACKS which suits all your need and desire

ALL TYPES OF HYDRALIC CYLINDERS
we have variety of HYDRALIC CYLINDERS which suits all your need and desire

details

Minepro 500HPV Power Packs
12V Mobile Powerpack with 2 x double acting function
Power pack – Gasoline powered 37 HP – 280 Bar – With grid
HIGH-PRESSURE HAND PUMPS
AIR-HYDRAULIC PUMPS for single-acting and double-acting cylinders
DOUBLE-ACTING HOLLOW PISTON CYLINDERS
HAND PUMPS for single-acting and double-acting cylinders
FLAT CYLINDERS
HIGH-PRESSURE HAND PUMPS
HYDRAULIC POWER UNITS PO4
SINGLE-ACTING HOLLOW PISTON STEEL CYLINDERS
SINGLE-ACTING LIGHT-ALLOY CYLINDERS
Minepro 500HPV Power Packs

Minepro 500HPV Power Packs

Key Features:

–          Ideal for major work centers – enabling you to work on two machines at once.

–          Two times full power.

–          Portable and particularly suitable for mobile use.

–          Long service life and little maintenance required.

–          2 Power (2), simultaneous operation of two machines.

–          Power packs with remote control allow them to be switched on and off in push-button operation.

–          The controls are ergonomically designed.

–          The cable is 8 m long.

–          Fits with carry frame for mobile use.

12V Mobile Powerpack with 2 x double acting function

12V Mobile Powerpack with 2 x double acting function

Key Features:

  1. 12V Power Supply: Harness the efficiency and reliability of a 12V power supply, ideal for mobile and remote operations. This ensures you have the power you need, regardless of location.
  2. Double Acting Function: Equipped with two double-acting functions, this powerpack enables precise control and movement of hydraulic cylinders in both directions, making it perfect for a variety of applications requiring bidirectional force.
  3. Compact and Portable: The lightweight and compact design allows for easy transportation and deployment, ensuring you can take it wherever the job demands without hassle.
  4. Durability: Constructed with high-quality materials and robust engineering, this powerpack is built to withstand the rigors of demanding environments, providing long-lasting performance and reliability.
  5. User-Friendly Operation: Featuring intuitive controls and straightforward operation, this powerpack ensures ease of use for both experienced operators and those new to hydraulic systems.
  6. Versatile Applications: Suitable for a wide range of uses, including automotive, agricultural, industrial, and marine applications. Whether you need to lift, lower, push, or pull, this powerpack delivers the power and precision required.
  7. Safety Features: Designed with safety in mind, the unit includes essential safety features to protect both the operator and the equipment, ensuring secure and reliable operation.
Power pack – Gasoline powered 37 HP – 280 Bar – With grid

Power pack – Gasoline powered 37 HP – 280 Bar – With grid

Key Features:

  1. High Performance Engine: Equipped with a formidable 37 horsepower gasoline engine, this power pack ensures consistent and efficient power output, allowing you to handle the toughest jobs with ease.
  2. Impressive Pressure: With a maximum pressure of 280 Bar, this unit provides the necessary force for a wide range of applications, from hydraulic tools and equipment to high-pressure cleaning tasks.
  3. Grid Integration: The built-in grid functionality allows for seamless integration with your existing power systems, providing versatility and adaptability to various operational environments.
  4. Durability and Reliability: Built to withstand the rigors of heavy use, this power pack features high-quality materials and robust construction, ensuring long-lasting performance and minimal maintenance.
  5. User-Friendly Design: Designed with the operator in mind, this unit includes intuitive controls and easy access for maintenance, making it user-friendly and straightforward to operate.
  6. Portability: Despite its powerful performance, the power pack is designed for portability, allowing you to transport it easily to different job sites as needed.
HIGH-PRESSURE HAND PUMPS

HIGH-PRESSURE HAND PUMPS

Up to 2500 bar for special applications.
LUKAS high-pressure hand pumps were developed for special purposes in which particularly high pressures are needed:
When working in test laboratories, e.g. leak or material tests
Widening pressed assemblies
In screw pretensioning technology
Work involving hydraulic assembly
The single-stage pumps deliver a constant flow rate up to the maximum pressure. The hand lever forces are very low (e.g. 36 kg at 250 MPa).
Facts:
Available with three different maximum pressures
Constant flow rate up to the maximum pressure
Labour-saving operation due to relatively low hand lever forces
Reliable, long-life quality

AIR-HYDRAULIC PUMPS for single-acting and double-acting cylinders

AIR-HYDRAULIC PUMPS for single-acting and double-acting cylinders

Easy operation with normal workshop compressed air supply.
These powerful air-hydraulic pumps make work easier for anyone who frequently needs to use cylinders in the workshop. Over longer periods, foot-operated pumps are more ergonomic and labour-saving than hand pumps.
Facts:
Two variants with different capacities
Suitable for driving both single-acting and double-acting hydraulic cylinders
Easy operation by means of a pedal with the settings Extend – Stop – Retract
Reciprocating pressure intensifier (air/oil) generates oil pressure proportional to primary air pressure
Benefits
Pressure limiting valve protects against overload
Extremely precise operation
Labour-saving and ergonomic
Maintenance-free and long service life
Hint
AHP 2-1E should not be used with the quick stop coupling box StMu 61-M. Unless absolutely necessary, its recommended, to choke return flow with the lock valve.

DOUBLE-ACTING HOLLOW PISTON CYLINDERS

DOUBLE-ACTING HOLLOW PISTON CYLINDERS

Light alloy allrounder for lifting, pulling or tensioning
LUKAS light-alloy hollow-piston cylinders are used to lift loads, pull fixed elements from rods, push in
bearings or tension steel cables. They are particularly light (up to 40% lighter than comparable steel
cylinders), making them much easier to use in all positions.
Facts:
Hydraulic retraction improves working speed and control
Faster piston return
Significantly reduced weight ensures easier handling
Piston rods with through bores for a wide range of applications
Especially light due to aluminium construction
Optional attachment holes in the cylinder base
Benefits
Overpressure protection with safety coupler StNi 6-D
With quick-release coupler for connection to the safe quick-stop system
High lateral load tolerance
Scraper ring for reduced wear
Full-load stroke limit
Especially safe connections for especially safe work
Only LUKAS offers a complete system for an operating pressure of 500 bar. Why? Because we think about your safety! With the quick release, connections are faster and safer. And the quick stop, unique worldwide, protects you against unintended lowering of the load while the lower maximum pressure results in extended service life for all components.

HAND PUMPS for single-acting and double-acting cylinders

HAND PUMPS for single-acting and double-acting cylinders

The rugged and user-friendly source of force.
LUKAS hand pumps are lightweight and easy to use, and suitable for use with most of the cylinders in our range.
These rugged two-stage pumps automatically switch between low and high pressure during the stroke , so that cylinders extend quickly when no load is applied and can operate effectively and precisely under load.
Facts:
Automatic switching from high and low pressure
Variants for single-acting and double-acting cylinders
Drain valve for precision lowering of single-acting cylinders
Practical handle as standard
Can be used horizontally and vertically (with pump head downwards)
Suitable control valves can be retrofitted as needed
Large model ZPH 3 with particularly high capacity

FLAT CYLINDERS

FLAT CYLINDERS

The perfect helper when things get tight.
These cylinders set to work when loads are heavy and space is at a premium. For example when lifting machinery, replacing expansion bearings or lifting loads for the next process step with a higher cylinder.
Facts:
Extremely low retracted height (from 37 mm)
Extremely compact
Low wear and high strength
Made from hardened steel
Some models equipped with handles
Variants for working with 500 bar and 700 bar
The flat cylinders are retracted to their original position by a load.
Benefits
500-bar variants with quick-release coupler for connection to the safequick-stop system
In 700-bar series with internationally typical screw couplers
Attachment holes in the cylinder body as standard (700 bar models)
Full-load stroke limit
Especially safe connections for especially safe work
Only LUKAS offers a complete system for an operating pressure of 500 bar. Why? Because we think about your safety! With the quick release, connections are faster and safer. And the quick stop, unique worldwide, protects you against unintended lowering of the load while the lower maximum pressure results in extended service life for all components.

HIGH-PRESSURE HAND PUMPS

HIGH-PRESSURE HAND PUMPS

Up to 2500 bar for special applications.
LUKAS high-pressure hand pumps were developed for special purposes in which particularly high pressures are needed:
When working in test laboratories, e.g. leak or material tests
Widening pressed assemblies
In screw pretensioning technology
Work involving hydraulic assembly
The single-stage pumps deliver a constant flow rate up to the maximum pressure. The hand lever forces are very low (e.g. 36 kg at 250 MPa).
Facts:
Available with three different maximum pressures
Constant flow rate up to the maximum pressure
Labour-saving operation due to relatively low hand lever forces
Reliable, long-life quality

HYDRAULIC POWER UNITS PO4

HYDRAULIC POWER UNITS PO4

MOBILE POWER FOR SMALL AND MEDIUM-SIZED CYLINDERS.
With the compact motor pumps from the PO 4 series, you will be well-equipped if you frequently need to operate small and medium-sized cylinders at different locations. These compact power packs can be relied on to work even for longer periods of time.
Facts:
Portable and particularly suitable for mobile use
Long service life and little maintenance required
Equipped with the special LUKAS radial piston pump with patented suction valves for maximum efficiency
High switchover pressure for fast lifting without load
Constant high pressure flow capacity up to maximum pressure
Power units with remote control allow the motor to be switched on and off in push-button operation. The controls are ergonomically designed. The cable is 3 m long.
Functions of the valve variants
Version NA for single-acting cylinders:
Extend – hold load with motor switched off – retract with motor switched on or off (pressureless oil flow).
Version N3 for single-acting cylinders:
Precision lifting and positioning of the load – hold load with motor switched on (pressureless oil flow) – retract with motor switched on or off
Version N4 for double-acting cylinders:
Extend – hold load with motor switched on (pressureless oil flow) – retract with motor switched on.
Versions with solenoid valve and remote control
L 2/2 – without load-holding function
Motor start-up when remote control is activated, solenoid valve closes. The connected hydraulic cylinder extends as long as the push-button is held down. To retract, release the button, motor stops, solenoid valve in neutral gear, cylinder retracts with spring return.
G 2/2 with load-holding function
Remote control with 3 setting switch
Setting “1” = motor on, solenoid valve closed, cylinder extends
Middle setting “0” = motor off, solenoid valve closed, load is held
Setting “2” = motor off, solenoid valve in neutral gear, cylinder retracts with spring return

SINGLE-ACTING HOLLOW PISTON STEEL CYLINDERS

SINGLE-ACTING HOLLOW PISTON STEEL CYLINDERS

For safe pulling, pressing and tensioning of heavy loads
These extremely rugged hollow-piston cylinders made from hardened steel are ideal for moving heavy bearings or safely tensioning steel cables. With their great strength they can deal with the heaviest loads, and they are available in a wide variety of models.
Facts:
Single-acting version for one working direction
Wide range of models for every possible scenario
Particularly robust and solid for challenging conditions
Also suitable for lifting work
Corrosion-protected thanks to baked enamel surfaces
Hard chrome plated pistons to prevent scoring and corrosion
Single-acting steel hollow-piston cylinders are retracted with a powerful spring. Thanks to their variety and high degree of standardization, they can be integrated into existing systems with ease.
Benefits
Standard external thread for easier assembly
Attachment holes in the cylinder base as standard
Standard with internationally typical screw couplers
Good lateral load tolerance
Full-load stroke limit
Scraper rings prevent pollution and wear
With optional LUKAS quick coupler for integration in an existing 500-bar system

SINGLE-ACTING LIGHT-ALLOY CYLINDERS

SINGLE-ACTING LIGHT-ALLOY CYLINDERS

Light, high-strength partners for lifting.
At LUKAS, you get a unique and comprehensive range of high-performance light-alloy cylinders. They are corrosion-protected and easier to transport and handle.
Thanks to their low weight and uncompromising quality, LUKAS light-alloy cylinders are the right helpers
if you need to move loads on construction sites or in workshops reliably, precisely and safely.
Facts:
Wide range of light and economical cylinders
Single-acting cylinders with strong return spring for fast retraction
Especially light due to aluminium construction
Signifi cantly increased safety in 500-bar system
Longer service life for all components (at 500 bar)
Guaranteed fit for your system
Whenever you need to lift or move the heaviest loads, the light-alloy cylinders demonstrate one of their greatest strengths: flexibility. With their wide range of configurations, the right cylinder is sure to be waiting for you – and if it isn’t, we can custom manufacture one tailored to your needs.

Benefits:
In 500-bar series with quick-release coupler with integrated safe quick-stop system
In 700-bar series with internationally typical screw couplers
High lateral load tolerance
Scraper ring for reduced wear
Full-load stroke limit
Especially safe connections for especially safe work
Only LUKAS offers a complete system for an operating pressure of 500 bar. Why? Because we think about your safety! With the quick release, connections are faster and safer. And the quick stop, unique worldwide, protects you against unintended lowering of the load while the lower maximum pressure results in extended service life for all components.
In use:
Lifting, pushing, shifting and pressing
Loads up to 140 tonnes
up to 200 mm total stroke
Construction sites, workshops and numerous other locations

POWER RANGE 3-13 KVA

Power generators

3000 rpm – 50/60Hz

400-230 V/480-240V

Generating sets designed to offer portable power solutions.

The ECHO series generators offer a wide range of uses and engine brands.

Equipped with Auto Choke System, Voltmeter, Circuit breaker, Hour Counter, Magneto-thermal switch, on board control panel and sockets.

POWER RANGE 10-3000 KVA

Power generators

1500-1800 rpm – 50/60Hz

400-230 V/480-240V

GENERATING SETS DESIGNED TO OFFER POWER SUPPLY SOLUTION

The range of Elcos base frame Generators offers a reliable energy source for industrial use.

Often used as a primary source of supply in self-production installations or as a mains emergency back-up system.

The range of ELCOS Base frame Generators allows management in parallel, stand alone or as master and slave modes.

The BF range covers the reference power from 10 to 3000 KVA, equipped with engines and premium brand alternators.

POWER RANGE 10-60 KVA

Power generators

1500-1800 rpm – 50/60Hz

400-230 V/480-240V 48 VDC

GENERATING SETS DESIGNED FOR TELECOM SITES

ELCOS Gensets for Telecom Sites combine the reliability and the versatility that TLC companies need.

This well engineered and easy to use generator provides High performance, Long runtime, OPEX and CAPEX reduction and Extended services intervals.

This range is the result of research and development to design a solution to ensure a versatile and highly reliable product to Telecommunications Companies.

The gensets are available in different arrangements: AC / DC /Hybrid Systems.

POWER RANGE 10-250 KVA

Generating set

1500-1800 rpm – 3000/3600 rpm – 50/60Hz

400-230 V/480-240V

 

GENERATING SETS DESIGNED TO OFFER THE BEST RELIABILITY IN THE EVENT OF A POWER FAILURE

The generating sets of our PRO range cover emergency needs in support to the standard supply of electricity.

They guarantee a reliable power supply and the maximum level of performance in the event of a sudden power failure.

The PRO range covers the reference power from 10 to 250 KVA, equipped with engines and premium brand alternators.

RENTAL BUILDING

POWER RANGE 15-500 KVA

Power generators

1500-1800 rpm – 50/60Hz

400-230 V/480-240V

GENERATING SETS DESIGNED FOR RENTAL APPLICATION

ELCOS Gensets for the Rental and for the Construction Market. They combine reliability and versatility in line with the needs of Rental Companies.

They cover all the functioning modes, equipped with accessories able to manage any requirement.

Compact size design, easy to use, they provide a safe and smart user experience. They highly perform when reliable on-demand power is required for limited periods in residential areas, where reduced sound levels are necessary.

SUPER SILENT

POWER RANGE 10-3000 KVA

Power generators

1500-1800 rpm – 50/60Hz

400-230 V/480-240V

GENERATING SETS DESIGNED TO OFFER THE BEST QUALITY TO LOW EMISSIONS ACOUSTIC

ELCOS Super Silent Gen Sets is a versatile range built to cover the widest application field and customizable to any needs.

They offer the maximum level of performance in the event of a sudden power failure.

These Gen Sets grant a reliable power supply and optimize the load thanks to our MC4 control panel.

The Super Silent range covers the reference power from 10 to 250 KVA, equipped with engines and premium brand alternators.

MOTOR DRIVEN METERING PUMPS
Motor driven metering pumps need to be robust, reliable and able to run on their own without supervision. Metering pumps with mechanically actuated diaphragms can be used almost universally in low pressure ranges. And what about servicing? Minimal. Accuracy? Uncompromising. Value for money? The best. Well adjusted The stroke length and stroke rate – in this case the motor speed – can be adjusted to alter the capacity of this pump. The rotation of the electric motor is stepped down by a worm gear and converted into a linear stroke movement by a cam. The slide rod transfers this stroke movement to the diaphragm in the dosing head. Two non-return valves prevent the feed chemical from flowing back during pumping.

The motor driven metering pumps can handle the following substances:
Chemicals up to over 1,000 l/h
Disinfectants in potable water treatment
Disinfectants in cooling circuits
Flocculants in waste water treatment
Additives in the paper industry
Additives in plastic manufacturing
Impressive benefits
The pumps offer a very wide performance range. They also offer extremely accurate metering even under fluctuating pressure conditions (rigid characteristic curve). This results in reduced chemical consumption and precise process control.

Need a higher performance class? These pumps always deliver robust, low-cost power. They are also flexible: they can be controlled via the stroke length and motor speed, allowing them to be seamlessly integrated and/or retrofitted in automated processes. Energy consumption depends on the power required, not the other way round. And lastly, specially designed metering profiles allow optimum metering results.

Stay in control.The multi-layer safety diaphragm with diaphragm rupture indicator offers maximum safety. There is also an overload shutdown to protect the pump.

Pretolite Starter Motor
We specialise in export sales, supplying units to commercial ships for use on life boat / tender engines and generators as well as to fleet operators of buses, coaches, commercial vehicles and industrial engines. We provide fast and competitively priced deliveries to Europe and worldwide.

About Prestolite
Prestolite Electric specialise in the manufacture of 12 & 24 volt starter motors and alternators for:

On-Highway applications: Commercial Vehicle, Coach & Bus
Off-Highway applications: Industrial, Marine & Agricultural
Prestolite are originally equipment suppliers to major engine manufacturers including Cummins, Caterpillar, Perkins & MTU.
Prestolite also manufacturers starters and alternators suitable to replace other brands including Bosch & Delco Remy. In may cases providing improved designs & performance.

PERISTALIC PUMPS
Our most adaptable pumps
Peristaltic pumps DULCOs*flex are amongst the most adaptable pumps from ProMinent. They are suitable for an enormously wide pump capacity range. The smaller DF2 to DF4 types of pumps have been specially designed for metering work in swimming pools, hot tubs or spa and wellness zones. sThe large peristaltic pumps DFA to DFD are ideal for specific tasks, as well as for extremely high pump capacities and pressures in laboratories and in industry. All models follow a simple operating principle and are extremely safe and easy to use.

HYDRAULIC EQUIPMENT
Hydraulic Equipment, Hydraulic Pumps, Hydraulic Design, Hydraulic Maintenance, Hydraulic Repairs and Hydraulic Installation
Turnkey Hydraulics is a leading supplier, designer and installer of hydraulic equipment in South Africa. We supply our services to a comprehensive array of clients, including the mining industry of South Africa. Since our inception in 1984 we have developed a name for service and product excellence. With over 3 decades in the hydraulics industry, Turnkey Hydraulics has developed a renowned reputation due to our streamlined and highly efficient services. From advanced hydraulic power pack products to complex hydraulic solutions, we have the hydraulic systems you require.

Our hydraulics services are highly specialised and uniquely all-inclusive. The Turnkey Hydraulics team have years of experience in the industry and with the teams combined expertise, our clients are sure to receive the best end-results. Not only do we offer hydraulic solutions including hydraulic installation, hydraulic repairs and hydraulic designs, we also provide a unique solution that sets us apart from our competitors. We offer an exceptional after sales service and our committed and highly experienced Turnkey Hydraulics team will assist with any queries that may arise.

This hands on service guarantees that our clients product requirements will be met effectively and we look forward to exceeding client expectation. Superior products and professional service is key to our decades of unyielding and ever flourishing success. We have our pulse on the finger of the hydraulics industry and as technology in the industry evolves, so too will Turnkey Hydraulics. We will always be one step ahead in the industry, guaranteeing only the most superior and streamlined of services.

Over the years, having developed a name for excellence in the industry, we have acquired premier agencies that have allowed for us to offer comprehensive and professional in-house solutions. We have consistent interaction and communication with these overseas principals and this ensures that we are up to date with current trends in the hydraulics industry. All technological developments will be applied to our designs to ensure our clients receive only the highest standard of service.

The Turnkey Hydraulics Philosophy
We opened our doors 30 years ago with the intention of offering the most premier hydraulic services in South Africa. Our goal was to create long lasting and trusted relationships with all of our clients. Our founding philosophy is still in place and due to our unyielding commitment to service excellence and client satisfaction we continue to grow sas a leading hydraulics specialist in South Africa. We pay close attention to detail in every aspect of our business and offer a hands on solution from beginning to end. From the design phase through to the commissioning phase, we invest great care in every aspect of our projects ensuring the best possible end-result. Turnkey Hydraulics will continue to grow and evolve and will continuously offer high levels of service and unbeatable after sales support.

Diaphragm Metering Pump
Capacity range of single pump: 0.19 – 60 l/h, 10 – 1.5 bar
The diaphragm metering pump Extronic® is perfectly suited for the sensitive use of liquid media in facilities with an explosive gas atmosphere as well as for mines at risk of firedamp, as it is approved in compliance with the EC EX Regulation 94/9/EC (ATEX).

Precise metering with explosion protection
The ATEX-compliant diaphragm metering pump Extronic® (EXBb) is tested and approved in line with the harmonised EC provisions of EN 50014/50018 for “compression-resistant enclosures” and thus offers the maximum level of protection. The short-stroke solenoid and the complete pump control are integrated in the pump housing so that, together with the explosion-proof power end, there is IP 65 protection against contact and humidity as per DIN 40050 even when the front cover is open.

Optimum adaptation for use in areas at risk from explosion
ATEX-compliant in line with EExd IIC T6 and EExd I/IIC T6 Excellent operating and functional reliability by a microprocessor controller, which compensates for fluctuations of mains voltage and automatically switches from 50 to 60 Hz operation Broad range of applications with an operating voltage of 500 V, 230 V and 115 V Ease of integration into processes thanks to the range of control types (internal, external contact, analogue) Also suitable for gaseous media, thanks to self-bleeding head

about-us

CUSTOMISED SOLUTIONS

Our highly motivated and qualified staff and experts in the production of specialised cylinders, power units and generators which meet existing requirements in all sectors. We use state of the art machinery to manufacture cylinders for mobile and stationary hydraulics as well as many special applications to customer specifications.

OUR MISSION

Minepro Supplies and its family of companies, will provide proficient, professional and competitive engineering and manufacturing services to all our clients. Our services will foster a culture that places priority on safety and innovation. We will provide quality places of employment for all our employees and provide strong stewardship to the communities in which we work.

Exceptional attention for effective solutions
The experience gained through meeting the demands of our customers is reflected in every product and is an integral part of our services, development and production. Our team is comprised of over 100 employees, who ensure that we find the most effective solution for your needs.

Meeting the needs of the industry
We are a company established because of the demands of the mining,engineering and telecom sectors. There is a high demand placed on hydraulic systems that have developed over time, we thus have developed and adapted our profile and products to new developments. We specialize in the following equipment: power units,generators,hydraulic pumps,cylinders,solar geysers,neutralisting pumps & motor pumps for all cylinders,power neutralisers and solar panels.

contact

MINEPRO SUPPLIES (PTY) LTD

REG NO: 2015/319354/07

PHYSICAL ADDRESS:

9 Hawkins Ave, Epping, Cape Town
Western Cape, 7460, South Africa

FOR GENERAL INQUIRIES:

NEWSLETTER!!!